Samsung OfficeServ 7000 Series Programming Manual page 101

No Option
56 VOIP REALRBT
58 CO-CO TM ALL
60 SMDR LOG ALL
61 NO ITEM COST
62 SMDR
AUT2ACC
64 IPNW REAL RB
66 TRK AUTO MOH
67 TRSF VT KEY
68 PAIR NO RING
69 DISA NO ACT
70 ICM AUTOHOLD
73 DTMF TO S0
74 STNHOLD PICK
75 AREA DELETE
76 ELCR DIALTON
77 NET DTMF FWD
83 3.1K W/O HLC
© SAMSUNG Electronics Co., Ltd.
OfficeServ 7000 Series Call Server Programming Manual
Default
OFF When ON, the system will connect the real path of the
outgoing trunk to the incoming VoIP trunk user instead of
providing virtual ringback tone.
OFF When ON, the system trunk call will be attached timer for
prevent the call from locking up
OFF If the hotel feature is in admin/normal station mode and cost
is '0', this option allows 'smdr record save'.
OFF If the hotel feature is in check-in mode, this option allows
skipping item code and cost input.
OFF When ON, the AUTHORIZATION CODE will be printed in
ACCOUNT field of SMDR.
OFF When ON, the system will connect the real path of the
outgoing trunk to the VoIP networking trunk user instead of
providing virtual ringback tone.
OFF When ON, an incoming trunk call is connected to MOH
automatically after the DISA ANSWR timer (MMC 503)
expires and the caller hears MOH. If the TRK AUTOMOH
DISC timer in MMC501 expires before the call is answered,
it is disconnected. (To use this feature, MMC 400 AUTO
ANSWER option must set to ON.)
ON When ON, works like the VT key when the user transfers the
call to Voice Mail using the TRSF key.
OFF When ON, if a paired phone is busy the call camps on and a
message waiting indication is set at the busy phone and
does not ring the free paired extension.
OFF When ON, a DISA call will go to the station assigned in MMC
406 after the DISA NO ACT timer expires.
OFF When ON, will allow internal calls to be put on hold
automatically when another call is taken.
OFF When ON, this option allows sending DRMF to S0 extension.
OFF When ON, this option allows a different extension to pick up
intercom hold.
OFF In a Phonebook outgoing call, this option allows deleting the
area code and making the outgoing call.
OFF In second LCR operation, this option allows generating a
different dial tone.
OFF When ON, ext fwd is specified in SPnet when only the
station port is captured and the dial tone is heard.
OFF When ON, an incoming call is dialed when the type of ISDN
incoming call is 3.1K AUDIO type without HLC.
Description
(Continued)
2-63