Assign Extension/Trunk Use - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[304] ASSIGN EXTENSION/TRUNK USE

Allows you to select which stations are allowed to make calls through C.O. lines or to
answer calls for C.O. lines. (on a station and trunk use group basis)
CONDITIONS

Stations are set to use group numbers 001~300 (001~100 in OfficeServ 7100, 7200
MP20S) and trunks are set to use group numbers 301~500 (101~200 in OfficeServ
7100, 7200 MP20S) in MMC 614, ASSIGN USE GROUP.

If a station group is set to NO Dial, stations cannot place calls on that trunk group.

If a station group is set to NO Answer, stations cannot answer incoming calls on that
trunk group.
MMC 406, Trunk Ring Assignment, overrides this MMC for the answer option.
DEFAULT DATA
DIAL: YES
ANS: YES
ACTION
1) Press Transfer button and enter 304.
Display shows:
2) Dial the station use group number. (e.g., 005)
OR
Press Volume button to select station use group and
press Right Soft button.
OR
Select all station use groups.
3) Dial the station use group number. (e.g., 304)
OR
Press Volume button to select trunk use group and
press Right Soft button.
OR
Select all trunk use groups.
2-86
DISPLAY
(001) USE (301)
DIAL:YES ANS:YES
(005) USE (301)
DIAL:YES ANS:YES
(ALL) USE (301)
DIAL:YES ANS:YES
(005) USE (304)
DIAL:YES ANS:YES
(005) USE (ALL)
DIAL:YES ANS:YES
© SAMSUNG Electronics Co., Ltd.