[715] PROGRAMMED STATION MESSAGE
Allows custom messages to be programmed or default messages to be changed.
ENTERING CHARACTERS
Refer to ENTERING CHARACTERS in MMC 104, STATION NAME.
There are 15 messages in the system:
MESSAGES 01-10 are 16-character pre-programmed default messages. Any of them can
be changed. MESSAGES 11-15 are 16-character blank messages that can be created.
DEFAULT DATA
TEN PROGRAMMED MESSAGES:
01. IN A M EETING
02. OUT ON A CALL
03. OUT TO L UNCH
04. LEAVE A MESSAGE
05. PAGE M E
06. OUT O F TOWN
07. IN TOMORROW
08. RETURN AFTERNOON
09. ON VACATION
10. GONE H OME
ACTION
1) Press Transfer button and enter 715.
Display shows:
2) Enter message number. (e.g., 11)
OR
Press Volume button arrow to make selection.
Press Right Soft button to move cursor.
3) Enter message via dial keypad. (maximum 16
characters)
Use 'A' button to toggle upper case/lower case.
Press Right Soft button to return to step 2.
4) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
MMC 115
© SAMSUNG Electronics Co., Ltd.
OfficeServ 7000 Series Call Server Programming Manual
SET PROGRAMMED MESSAGE
DISPLAY
PGM.MESSAGE (01)
IN A MEETING
PGM.MESSAGE (11)
Blank Message
PGM.MESSAGE (11)
IN MEETING ROOM
2-245