CHAPTER 2. MMC Programming
[803] ASSIGN TENANT GROUP
Allows the assignment of tenant groups on a per-cabinet, slot and port basis. The simple
rule is Cabinet-Slot-Port = Tenant. The simplicity of this program allows for flexible
assignments. The only information needed is the correct correlation of entries.
DEFAULT DATA
ALL ASSIGNMENTS: TENANT 1
ACTION
1) Press Transfer button and enter 803.
Display shows:
2) Enter cabinet number. (if no change press Right Soft
button to move cursor.)
3) Enter slot number. (if no change press Right Soft
button to move cursor.)
4) Enter port number. (if no change press Right Soft
button to move cursor.)
5) Enter tenant number. (if no change press Right Soft
button to return to step 2)
6) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
NONE
2-320
DISPLAY
TENANT GROUP
C:1 S:1 -01 T:1
TENANT GROUP
C:1 S:1 –01 T:1
TENANT GROUP
C:1 S:2 -01 T:1
TENANT GROUP
C:1 S:2 -03 T:1
TENANT GROUP
C:1 S:2 -03 T:2
© SAMSUNG Electronics Co., Ltd.