CHAPTER 2. MMC Programming
[824] NETWORK DIAL TRANSLATION
Assigns the digit translation table used for networking. Generally, under networking
conditions, you must dial the node ID and extension number to call the another node
extension. In this MMC, the system provides a simple digit translation so that the user need
only dial the extension number to call the station on the other node. The access digit needs
to be programmed in MMC 724 ('LCR-01' parameter in NETWORK NUMBER option)
first. The system allows 96 entries for network dial translation.
DEFAULT DATA
NONE
ACTION
1) Press Transfer button and enter 824.
Display shows:
2) Dial the entry number.
OR
Press Volume button to select and press Right Soft
button to move cursor.
3) Enter digit string for access to node (max. 8 digits)
and press Right Soft button to move cursor.
4) Enter number of digits user will dial. (e.g., 3 for 3-
digit extension)
OR
Press Volume button to select and press Right Soft
button to move cursor.
5) Enter max. number of digits system will dial.
OR
Press Volume button to select and press Right Soft
button to move cursor.
6) Enter YES/NO to display other node extension in
internal extension number format.
OR
Press Volume button to select and press Right Soft
button to move cursor.
2-348
DISPLAY
01:601
SIZE:0 MAX:00
01:601_
SIZE:0 MAX:00
01:60160201
SIZE:0 MAX:00
01:60160201
SIZE:3 MAX:00
01:601 (60201
SIZE:3 MAX:08
01:601 (60201
DISP:N MBX:N
© SAMSUNG Electronics Co., Ltd.