Samsung OfficeServ 7000 Series Programming Manual page 412

CHAPTER 2. MMC Programming
No Parameter
15 DTMF TYPE
16 TOS/DifServ
17 G711 FRAME
18 G729 FRAME
19 G729s FRAME
20 G723 FRAME
DEFAULT DATA
SEE DESCRIPTION
ACTION
1) Press Transfer button and enter 835.
Display shows the first option.
2) Enter MGI type (0-2) via dial keypad.
OR
Press Volume button to make selection and press
Right Soft button to move cursor.
3) Enter MGI DSP parameter via dial keypad.
OR
Press Volume button to make selection and press
Right Soft button to move cursor.
4) Enter MGI DSP parameter.
OR
Press Volume button to make selection and press
Right Soft button to save and return to step 3.
2-374
Description
There are two types of DTMF transmission: INBAND,
which is industry standard (H.245) type DTMF transport,
and OUTBAND which is a Samsung proprietary
method.
An 8-bit binary value that will be used by external
routers, switches, etc, (that optionally support TOS-bit
prioritization) to identify the transport-priority value of
data packets generated by the MGI card. This value can
be left at the default value (00000) if your network
infrastructure does not support this method of
bandwidth management.
specify the transmission interval time of the VoIP packet
for G.711 codec
specify the transmission interval time of the VoIP packet
for G.719 codec
specify the transmission interval time of the VoIP packet
for G.729a codec
specify the transmission interval time of the VoIP packet
for G.711 codec
(Continued)
Default
OUTBAND
All bits 0
20 ms
20 ms
20 ms
30 ms
DISPLAY
MGI6:AUDIO CODEC
G.729
MGI6:AUDIO CODEC
G.729
MGI6:G729 FRAME
20 MS
MGI6:G729 FRAME
40 MS
© SAMSUNG Electronics Co., Ltd.