Samsung OfficeServ 7000 Series Programming Manual page 210

CHAPTER 2. MMC Programming
Timer Name
VM RBK DELAY TM
VOIP RE-ROUTE TM
When timers value is '0'
Some timers are disabled when their value is set to '0'.
DEFAULT DATA
SEE DESCRIPTION
SOME TIMERS DEPEND ON COUNTRY
ACTION
1) Press Transfer button and enter 501.
Display shows first timer value:
2) Press Volume button to select timer and press Right
Soft button to move cursor.
3) Enter new value using keypad; if valid, system
returns to step 2 with new value.
4) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
NONE
2-172
Default Range Unit
0 0-250 SEC
15 0-25 SEC
Description
In case of an incoming call, the answer time
for VM ringback tone is delayed
If an outgoing call made via a VoIP trunk
does not receive an acknowledgement
message from the called party within this
time, the call is treated as failed.
DISPLAY
AA INT DGT TIME
05 SEC
KMMC LOCK OUT TM
060 SEC
KMMC LOCK OUT TM
060 SEC250
© SAMSUNG Electronics Co., Ltd.
(Continued)