Using Fade-To-Black (Ftb) - Sony AWS-G500 Operating Instructions Manual

Using Fade-to-Black (FTB)

Fading in a different video after fading out
Setting the fade to black transition time
The functions of the setting items are as follows.
[X]: Specifies the horizontal position.
[Y]: Specifies the vertical position.
Note
After step 1, you can specify the vertical or horizontal position by pressing
up, down, left, or right on the positioner. (When using the positioner, you do
not need to select [X] and [Y].)
Caution
When adjusting the position of the picture-in-picture image up, down, left, or
right, the image shifts in 10-point increments.
5
Press the MENU button to close the menu.
This fades the video in from or out to a black screen.
Press the FTB button.
This fades out the program output to a black screen, except for any superimposed
logo.
LOGO
Press the FTB button once more to fade in the video from the black screen.
LOGO
Note
While the screen is black, the PGM selection buttons change to amber.
1
After fading to a black screen, select a different video with the PGM
selection buttons.
2
Press the FTB button.
This fades in the newly selected video.
1
Press the MENU button.
2
In the top menu, select [Fade To Black].
LOGO
LOGO
LOGO
LOGO
Video Switching 89