Changing The Transition Time - Sony AWS-G500 Operating Instructions Manual

Changing the Transition Time

84 Video Switching
2
Select the effect pattern.
To change the effect pattern, follow the procedure in "Changing the Effect
Pattern" (page 85).
3
Determine the next program output video, and select this with the NEXT
selection button.
The selected video appears in the PVW viewer.
4
Carry out the transition with the AUTO TRANS button or transition lever.
The program output video changes to the NEXT selection video by a wipe
transition.
Each press of the AUTO TRANS button, or operation of the transition lever,
the program output video changes to the NEXT selection video by a wipe
transition.
Note
You can apply an edge effect to the wipe pattern. For details, see "Applying Edge
Effects" (page 109).
Before carrying out a transition with the AUTO TRANS button, set the transition
time.
1
Press the MIX button or EFFECT button.
The current settings appear in the effect display.
2
Press the MENU button.
3
In the top menu, select [Video Effect].
4
1 Select [Transition Time], and confirm; 2 move the slider to set the
transition time.
The transition time is set in frame units.
1
Effect Pattern
Transition Time 20F
Edge Off
Key Type Luminance
Key Adjust
5
Press the MENU button to close the menu.
The set transition time appears in the effect display.
2