Table of Contents
Advertisement
Auto Repeat Playback
Setting the auto repeat range
184
Operations on Files on the External Hard Disk
You can set playback of a file to start again automatically from the beginning
each time playback ends.
Specifying a playback start point and end point enables auto repeat playback of
only part of the file.
1
Press the NEXT selection button of the source viewer displaying the hard
disk number.
The HDD file guide menu appears in the menu display.
2
Open a file.
For details on opening files, see "Playing Files" (page 181).
3
Select [Auto Repeat].
The setting turns on or off each time it is selected.
File Open
File Close
SHIFT
z
+
z
1
2
3
4
5
6
8
Start
9
End
- Auto Repeat
On
[8 Start] and [9 End] become selectable, and an icon appears in the device
status of the source viewer and PVW viewer.
Note
You can switch auto repeat on/off by pressing the [0] numeric button.
Set a playback start point and end point for auto repeat playback of part of a file.
1
Set [Auto Repeat] to On.
2
At the position you want auto repeat playback to start, press the [8] numeric
button while holding down the SHIFT button.
Icon
Advertisement
Table of Contents
