Table of Contents
Advertisement
Switching with the CUT button after checking the next video in the PVW viewer
A red frame appears around the source viewer for the selected video.
3
Determine on the next video, then repeat the procedure in step 2.
To switch while checking the new video in the PVW viewer, use the CUT button.
1
In the source viewer, select the video you want to switch to (the next program
output).
Example: You may want
to switch to video 3.
2
Press the NEXT selection button with the same number as this video.
1
2
3
4
The NEXT selection button you pressed lights amber, and the selected video
appears in the PVW viewer.
An amber frame appears around the source viewer for the next video.
Current program output video
Lit red.
PGM
NEXT
5
6
INT
Press button 3.
Video Switching
79
Advertisement
Table of Contents
