Storing A Camera Preset - Sony AWS-G500 Operating Instructions Manual

Resetting pan and tilt positions
Adjusting the white balance automatically

Storing a Camera Preset

160 Controlling Cameras
1 Center
2 Base Guitear
3 Drum
4 Right
5 Vocal
6
7 Back Light
8 Pan-Tilt Reset
9 One Push AWB
- Focus Auto/Manual
Control Setup
When [Pan-Tilt] (page 164) is set to [Enable], you can reset pan and tilt to their
default positions.
Use this function when the camera head is moved during operation, when the
camera's STANDBY indicator flashes for reasons including fingers or objects
getting caught in the camera, or when pan and tilt operations stop functioning.
1
Press the NEXT selection button to which the camera video is assigned.
A camera guide menu appears in the menu display.
2
Select [8 Pan-Tilt Reset], and confirm.
1 Center
2 Base Guitear
3 Drum
4 Right
5 Vocal
6
7 Back Light
8 Pan-Tilt Reset
9 One Push AWB
- Focus Auto/Manual
Control Setup
When [White Balance] (page 164) is set to [One Push], you can specify when to
perform automatic white balance adjustment by pressing the numeric buttons.
1
Press the NEXT selection button to which the camera video is assigned.
A camera guide menu appears in the menu display.
2
Select [9 One Push AWB], and confirm.
1 Center
2 Base Guitear
3 Drum
4 Right
5 Vocal
6
7 Back Light
8 Pan-Tilt Reset
9 One Push AWB
- Focus Auto/Manual
Control Setup
The camera preset function allows you to save the state of the camera supporting
VISCA protocol to one of the numeric buttons on the front panel. Then by
pressing the numeric button, you can automatically set the camera to the saved
state.