Table of Contents
Advertisement
Side Panel
With the protective panel opened
qa Ventilation
holes
a FACTORY USE connector
Inputs and outputs GPI signals.
• Connecting this connector and the tally
connector of a CCU (camera control unit) or
other device enables the tally lamp of the camera
to light (page 167).
• When an external device is connected, you can
perform PGM and NEXT selection button
operations from the external device (page 169).
b "Memory Stick" slot
This slot takes a "Memory Stick." Use it for
upgrading the operating software (page 270),
importing font files (page 155), exporting/
importing job data (pages 227, 228), exporting
EDL, importing graphics and logo files (page
235), exporting graphics files created with Text
Typing Tool (page 129), exporting VOD files
(page 238), etc.
While the "Memory Stick" is being accessed, the
access indicator to the left of the slot lights.
c NETWORK connector (RJ-45)
Connect an external network adaptor or router.
This supports 10Base-T and 100Base-TX
Ethernet.
The green indicator blinks while the network is
active.
An amber LED lights while the unit is connected
by 100Base-TX.
CAUTION
For safety, do not connect the connector for
peripheral device wiring that might have excessive
voltage to this port. Follow the instructions for
this port.
26
Names and Functions of Parts
1 FACTORY USE
connector
FACTORY USE
8
1
15
9
RESET
8 1 (power)
button
9 RESET button
0 Hole for anti-theft wire
2 "Memory Stick" slot
3 NETWORK connector
4 REMOTE (remote control)
NETWORK
(
)
RGB
GUI
USB
5 Internal hard disk
6 USB connectors
7 Operating monitor connector (RGB (GUI))
ATTENTION
Par mesure de sécurité, ne raccordez pas le
connecteur pour le câblage de périphériques
pouvant avoir une tension excessive à ce port.
Suivez les instructions pour ce port.
VORSICHT
Aus Sicherheitsgründen nicht mit einem
Peripheriegerät-Anschluss verbinden, der zu
starke Spannung für diese Buchse haben könnte.
Folgen Sie den Anweisungen für diese Buchse.
CAUTION
When you connect the network cable of the unit to
peripheral device, use a shielded-type cable to
prevent malfunction due to radiation noise.
d REMOTE (remote control) connector
This connector is provided for future functional
expansion.
e Internal hard disk access indicator
This indicator lights while the internal hard disk is
being accessed.
f USB connectors (USB) (USB
compatible)
The upper connector is number 1, and the lower
connector is number 2.
Use these connectors to connect a USB keyboard.
Also use them for connecting USB flash memory,
upgrading the operating software (page 270),
importing font files (page 155), exporting/
importing job data (pages 227, 228), exporting
EDL, importing graphics and logo files (page
235), exporting graphics files created with Text
Typing Tool (page 129), exporting VOD files
(page 238), etc.
connector
REMOTE
5
1
9
6
access indicator
Advertisement
Table of Contents
