Table of Contents
Advertisement
Installing Option Modules
2
Pass the cables through the cable clip.
Allow some slack when routing the cables to prevent them from bending
sharply.
3
Close the lever compartment.
To install an option module, first remove the interface module fitted to the unit
as standard, and install the new interface in the slot.
Note
You can install an option module in any slot.
2
1
1
Loosen the two screws fixing the interface module fitted as standard.
2
Pull out the interface module.
3
Insert the option module into the slot.
4
Tighten the screws.
Caution
When installing an option module, always turn the unit off first. If you install an
option module with the unit powered on, this may damage the option module.
3
4
Connections
65
Advertisement
Table of Contents
