Changing The Video With A Effect Transition - Sony AWS-G500 Operating Instructions Manual

Changing the Video With a Effect Transition

Basic transition effect operations
80 Video Switching
3
Press the CUT button.
This interchanges the video in the PGM viewer and PVW viewer, and
switches the program output video.
At the same time, the lit PGM selection button and NEXT selection button
interchange, and the colors of the frames in the source viewer also
interchange.
1 2 3 4
Lit amber.
Lit red.
1 2 3 4
Each press of the CUT button interchanges the program output video and the
NEXT selection video.
Instead of an instantaneous cut, you can gradually switch from one video to
another through the application of one of various effects.
The basic procedure for applying an effect to a transition is as follows.
Set the transition effect.
Select the next video to be output
using the NEXT selection buttons.
Carry out the transition.
There are two ways of executing a transition:
• Automatic execution with the AUTO TRANS button
• Manual execution using the transition lever
AUTO TRANS button
MIC
Lit red.
PGM
Before you press the CUT button
NEXT
5 6 INT
PGM
After you pressed the CUT button
NEXT
5 6
INT
Lit amber.
0
KEY
FTB
CUT
AUTO DSK
TRANS
Transition lever