Controlling Vcr Playback From The Unit; Registering The Vcr To Be Controlled; Performing Playback - Sony AWS-G500 Operating Instructions Manual

Controlling VCR Playback From the Unit

Registering the VCR to be Controlled

Performing Playback

Playback operations for VCRs connected to the DV connectors on an SD video
interface module (BKAW-570) can be performed from the unit. You can also
register specific positions on a videotape to the numeric buttons, 1 to 6, and
access them whenever necessary.
Note
You cannot control the following devices.
• Cameras (with playback functions) that are set to camera mode
• Devices with remote switching functions, but with unconfigured remote
settings
• Devices that do not support AV/C protocol
1
Connect the VCR to the DV connectors on the SD video interface module.
For details on VCR connection, see "Connecting a VCR" (page 61).
2
Assign input signals from the VCR to the selection buttons.
For details on assigning input signals, see "Assigning video input signals to
the selection buttons" (page 67).
3
1 Select the number of the selection button that the VCR is assigned to, and
confirm; 2 select [Control], and confirm; 3 select [AV/C Player], and
confirm.
1
Source Name
1
Input
2
Source Aspect
3
Control
4
5
6
4
Press the MENU button to close the menu.
1
Press the NEXT selection button to which the VCR to be controlled is
assigned.
The VCR guide menu appears in the menu display.
2 3
OFF
S1-1 DV VISCA 1
4:3 VISCA 2
Off VISCA 3
B VISCA 4
VISCA 5
VISCA 6
VISCA 7
AV/C Player
Controlling VCR Playback From the Unit 197