Sony AWS-G500 Operating Instructions Manual page 185

Clearing the start point and end point
Note
You can also specify start and end points via the HDD file guide menu.
1 Select [8 Start], and confirm; 2 select [Mark Start], and confirm.
1
File Open Mark Start
File Close SHIFT z + z Clear Start
1 aaaaaaaa
2 bbbbbbbb
3 ccccccccc
4
5
6
8 Start xx:xx:xx:xx
9 End
3
At the position you want auto repeat playback to end, press the [9] numeric
button while holding down the SHIFT button.
Note
You can also specify start and end points via the HDD file guide menu.
1 Select [9 End], and confirm; 2 select [Mark End], and confirm.
1
File Open Mark End
File Close SHIFT z + z Clear End
1 aaaaaaaa
2 bbbbbbbb
3 ccccccccc
4
5
6
8 Start xx:xx:xx:xx
9 End
When setting the auto repeat range, the timecodes for the start and end points
appear in [8 Start] and [9 End] in the HDD file guide menu.
Furthermore, the start point and end point are displayed in the playback
position display of the source viewer and PVW viewer.
Start point
Note
When a start point and end point are set, pressing the [8] or [9] numeric
button moves the playback position of the file to the start or end point. If they
are not set, the playback position moves to the beginning or end of the file.
1
Open the file in which the start and end points are set.
2
SHIFT z +8
2
SHIFT z +9
End point
Operations on Files on the External Hard Disk 185