Table of Contents
Advertisement
11.1.17
+CMGW Write message to memory
Command
Execute
text mode (+CMGF=1):
+CMGW[=<oa/da>[,<tooa/toda>[,<stat>]]]
<CR>text is entered<ctrl-Z/ESC>
PDU mode (+CMGF=0):
+CMGW=<length>[,<stat>]<CR>
PDU is given<ctrl-Z/ESC>
Test
+CMGW=?
Optional. 07.05 section 3.5.3. Text/PDU entering as specified in 07.05.
11.1.18
+CMGD Delete message
Command
Execute
+CMGD=<index>
Test
+CMGD=?
Optional. 07.05 section 3.5.4.
11.1.19
+CMGC Send command
Command
Execute
text mode (+CMGF=1):
+CMGC=<fo>,<ct>[,<pid>[,<mn>[,
<da>,[<toda>]]]]<CR>text is entered
<ctrl-Z/ESC>
PDU mode (+CMGF=0):
+CMGC=<length><CR>
PDU is given<ctrl-Z/ESC>
Test
+CMGC=?
Optional. 07.05 section 3.5.5. Text/PDU entering as specified in 07.05.
11.1.20
+CMMS More messages to send
Command
Set
+CMMS=[<n>]
Read
+CMMS?
Test
+CMMS=?
Optional. 07.05 section 3.5.6. Controls the continuity of SMS relay protocol link. If enabled
(and supported by the network), several consecutive messages can be sent (+CMGS etc.)
much faster as the link is kept open.
Response
+CMGD: (list of supported
<index>s) [,(list of
supported <delflag>s)]
Response
text mode (+CMGF=1) and sending
ok:
+CMGC: <mr>[,<scts>]
PDU mode (+CMGF=0) and sending
ok:
+CMGC: <mr>[,<ackpdu>]
Response
Default
0
+CMMS: <n>
+CMMS: (0-2)
Response
Default
storing successful:
text mode:
+CMGW: <index>
[,129/145,
"STO UNSENT"]
PDU mode:
[,2]
+cms error
x
+cms error
x
Default
+cms error
text mode:
x
[2,0,0,
0,"",
129/145]
76/113
Advertisement
Table of Contents
