Cnma New Message Acknowledgement To Me/Ta; Cmgs Send Message; Cmss Send Message From Storage - Nokia D211 Developer's Manual

11.1.14

+CNMA New message acknowledgement to ME/TA

Command
Execute
text mode (+CMGF=1):
+CNMA
PDU mode (+CMGF=0):
+CNMA=[<n>[,<length>[<CR>PDU is given<ctrl-
Z/ESC> ]]]
Test
+CNMA=?
Optional. 07.05 section 3.4.4. PDU entering as specified in 07.05. Command is available only
when +CSMS=1 is supported.
Note: It depends on the +CSMS setting and AT interface state (data/command
mode) whether data task automatically handles acknowledgement or whether it
waits for the +CNMA command from the terminal before sending it back.
11.1.15

+CMGS Send message

Command
Execute text mode (+CMGF=1):
+CMGS=<da>[,<toda>]<CR>
text is entered<ctrl-Z/ESC>
PDU mode (+CMGF=0):
+CMGS=<length><CR>
PDU is given<ctrl-Z/ESC>
Test
+CMGS=?
Optional. 07.05 section 3.5.1. Text/PDU entering as specified in 07.05.
11.1.16

+CMSS Send message from storage

Command
Execute
+CMSS=<index>[,
<da>[,<toda>]]
Test
+CMSS=?
Optional. 07.05 section 3.5.2. Also SMS-COMMANDs can be sent, but if <index> contains
SMS-COMMAND and <da> is given, +CMS ERROR is returned.
Response
text mode (+CMGF=1) and sending ok:
+CMGS: <mr>[,<scts>]
PDU mode (+CMGF=0) and sending ok:
+CMGS: <mr>[,<ackpdu>]
Response
Text mode (+CMGF=1) and sending ok:
+CMSS: <mr>[,<scts>]
PDU mode (+CMGF=0) and sending ok:
+CMSS: <mr>[,<ackpdu>]
Response +cms error
x
PDU mode (+CMGF=0):
+CNMA: (0-2)
Default
text mode:
[,129/145]
Default +cms error
x
[,"",129/145]
75/113
+cms error
x