Me Error Command (Gsm 07.07); Cmee Report Mobile Equipment Error; Sms Commands (Gsm 07.05); Csms Select Message Service - Nokia D211 Developer's Manual

11. ME ERROR COMMAND (GSM 07.07)

11.1.1 +CMEE Report mobile equipment error

Command
set
+CMEE=<n>
read
+CMEE?
test
+CMEE=?
Mandatory. 07.07 section 9.1. Controls the presentation of extended error information result
code. See also result code +CME ERROR. Textual error code presentation (parameter value
2) is not supported.

SMS COMMANDS (GSM 07.05)

Note: SMS cannot be controlled using AT commands because the Nokia D211
SMS application (Nokia Short Messaging) controls them.

11.1.2 +CSMS Select message service

Command
set
+CSMS=<service>
read
+CSMS?
test
+CSMS=?
Mandatory. 07.05 section 3.2.1. Main difference between <service> 0 and 1 is that when
<service>=1, +CNMA acknowledgement is required because most MT short messages are
routed directly to TE.

11.1.3 +CPMS Preferred message storage

Command
set
+CPMS=<mem1>
[,<mem2>[
,<mem3>]]
read
+CPMS?
test
+CPMS=?
Mandatory. 07.05 section 3.2.2. <mem1> is for read/delete procedures, <mem2> for
writing/sending, <mem3> is preferred memory for received messages (when they are not
routed directly to TE).
Response Default
0
+CMEE: <n>
+CMEE: (0-1)
Response
+CSMS: 1,1,1
+CSMS: <service>,1,1,1
+CSMS: (0,1)
Response
+CPMS: <used1>,<total1>,<used2>,
<total2>,<used3>,<total3>
+CPMS: <mem1>,<used1>,<total1>,<mem2>,
<used2>,<total2>,<mem3>,<used3>,<total3>
+CPMS: ("ME","SM"),("ME","SM"),("MT")
Default
0
Default
"SM","SM","MT"
71/113
+cms error
x
x