Gsn Request Ta Serial Number Identification; Gcap Request Complete Capabilities List; De Facto; V View Configuration - Nokia D211 Developer's Manual

7.1.7 +GSN Request TA serial number identification

Command Response
execute
+GSN xxxxxxxxxx...
Optional. V.25ter section 6.1.7. Note that because TA and ME are in a single physical entity,
response of +CGSN is identical (i.e. IMEI).

7.1.8 +GCAP Request complete capabilities list

Command Response
execute
+GCAP +GCAP: +CGSM,+FCLASS,+DS,+W
Mandatory. V.25ter section 6.1.9. Above mentioned response returned when GSM 07.07
commands, some fax classes, and V.42bis compression supported.

7.2 DE FACTO

7.2.1 &V View configuration
Command Description
execute show current settings (all command parameter values defined under &F plus &Y setting)
&V[0]
show settings in stored profile 0 (all command parameter values defined under &W)
&V1
show settings in stored profile 1 (all command parameter values defined under &W)
&V2
Mandatory (values 1 and 2 shall be present only when stored profiles are supported).
Response format must fit in one 80 times 24 character display and all command parameters
stored in a profile (or current settings) must be shown as 'command name'-'values of
parameters' pairs (e.g. +CSSN=0,1 or E0 or S7=80 or +COPS=,2 or +CSCS="HEX").
7.2.2 &W Store configuration
Command Description
execute store to profile 0
&W[0]
store to profile 1
&W1
Mandatory when stored profiles are supported. Command parameters that are stored to a
profile are the same as listed under &F command except to the parameters of the following
commands which are not stored: +CMOD, +CSCA, +CSMP.
47/113