Cgqmin Quality Of Service Profile (Minimum Acceptable); Cgatt Gprs Attach Or Detach; Cgact Pdp Context Activate Or Deactivate - Nokia D211 Developer's Manual

14.1.3 +CGQMIN Quality of service profile (minimum acceptable)

Command
set
+CGQMIN=<cid>,<precedence>,<delay>,
<reliability>,<peak>,<mean>
read
+CGQMIN?
test
+CGQMIN=?
Optional. 07.60 section 10.2.3. This command is used to specify the minimum acceptable
profile that is checked by the MT against the negotiated profile returned in the Activate PDP
Context Accept message. Supported value of <cid>: 1. This command is used in
conjunction with the +CGDATA command.

14.1.4 +CGATT GPRS attach or detach

Command
set
+CGATT= <state>
read
+CGATT?
test
+CGATT=?
Optional. The execution command is used to attach the MT to the GPRS service, or detach
the MT from the GSRS service. Any active PDP contexts will be automatically deactivated
when the attachment state changes to detached.

14.1.5 +CGACT PDP context activate or deactivate

Command
set
+CGACT= [<state> [,<cid>[,<cid>[,..]]]
read
+CGACT?
test
+CGACT=?
Optional. The execution command is used to activate or deactivate the specified PDP
context(s). <cid>: a numeric parameter which specifies a particular PDP context definition.
Supported value of <cid>: 1
Response
+CGQMIN: <cid>,<precedence>,<delay>,
<reliability>,<peak>,<mean>
[<CR><LF>+CGQMIN: <cid>,<precedence>,
<delay>,<reliability>,<peak>,<mean>
[...]]
+CGQMIN: (1-2),(1-3),(1-4),(1-5),
(1-9),(1-18,31)
Response
: <state>
+CGATT
+CGATT: (0-1)
Response
+CGACT: <cid>, <state>
[<CR><LF>+CGACT: <cid>, <state>
[...]]
+CGACT: (0-1)
97/113