Gprs Commands (Gsm 07.07); Cgdcont Define Pdp Context; Cgqreq Quality Of Service Profile (Requested) - Nokia D211 Developer's Manual

14. GPRS COMMANDS (GSM 07.07)

14.1.1 +CGDCONT Define PDP context

Command
set
+CGDCONT=<cid>,<PDP_type>,<APN>,
<PDP_addr>,<d_comp>,<h_comp>,
<pd1>[,...[,<pdN>]]
read
+CGDCONT?
test
+CGDCONT=?
Mandatory unless only a single subscribed context is supported. 07.60 section 10.2.1.
Specifies PDP context parameter values for a PDP context. Supported value of <cid>: 1.
This command is used in conjunction with the +CGDATA command.

14.1.2 +CGQREQ Quality of service profile (requested)

Command
set
+CGQREQ=<cid>,<precedence>,<delay>,
<reliability>,<peak>,<mean>
read
+CGQREQ?
test
+CGQREQ=?
Optional. 07.60 section 10.2.2. Used to specify a Quality of Service Profile that is used when
the MT sends an Activate PDP Context Request message to the network. Supported value of
<cid>: 1. This command is used in conjunction with the +CGDATA command.
Response
+CGDCONT: <cid>,<PDP_type>,
<APN>,<PDP_addr>,<data_comp>,
<head_comp>,<pd1>[,...[,pdN]]
[<CR><LF>+CGDCONT:
<PDP_type>,<APN>,<PDP_addr>,
<data_comp>,<head_comp>,<pd1>
[,...[,pdN]]
[...]]
+CGDCONT: (1-2),"IP",,,(0,1),
(0,1)
Response
+CGQREQ: <cid>,<precedence>,<delay>,
<reliability>,<peak>,<mean>
[<CR><LF>+CGQREQ: <cid>,<precedence>,
<delay>,<reliability>,<peak>,<mean>
[...]]
+CGQREQ: (1-2),(1-3),(1-4), (1-5),
(1-9),(1-18,31)
Default
1,"IP",
,,0,0
<cid>,
96/113