Table of Contents
Advertisement
1
Nokia D211 security code required to execute the AT command
2
ME does not have a SIM card attached to it
3
PIN code required to execute the AT command
4
PUK code required to execute the AT command
5
memory location does not exist
6
phonebook memory location is empty
7
match in searched string is not found from any of the memory locations
8
general memory error; e.g. problems in SIM database communication
9
call hold/retrieve/swap/build/split/transfer/deflection failed or cannot be actioned
10
manual network selection is not possible because an unavailable or forbidden network name was given, or call is active
11
invalid password was given
12
PUK2 code required to execute the AT command
13
there is no network service to complete the request
14
supplementary service command failed due to an unknown error; i.e. an error that is not covered by other <err> values
15
AT interpreter does not support the operation (in case of +CLCK= when <fac>="AB" or ="AG" or ="AC" but <mode>≠0;
in case of +CPBW= when <index> is not given but <number> is)
16
PIN2 code required to execute the AT command
17
alpha entry to be stored is too long
18
number to be read/stored is too long
19
number to be stored contains characters that are not available in that memory
20
SIM interface control is not reserved (possible in case of +CSIM=) or maximum number of applications has reserved
SIM control
21
external ME is not connected to TA; this is not applicable to products that have ME and TA in one entity
22
external ME UI cannot be accessed
23
network timeout
24
entries cannot be stored in currently selected phone book memory (e.g. in missed calls list)
25
there is no active voice call
17.2 +CMS ERROR VALUES
Final result code +CMS ERROR: <err> indicates an error related to mobile equipment or
network.
<err>
0 – 127
128 – 255
300 – 340, 500
GSM 04.11 Annex E-2 values
GSM 03.40 subclause 9.2.3.22 values
GSM 07.05 subclause 3.2.5 values
106/113
Advertisement
Table of Contents
