13. VOICE COMMANDS (PN-3131)
Note: These are dummy commands that are included for compatibility reasons.
The Nokia D211 does not support voice calls.
13.1.1 +FCLASS DCE mode
Command
set
+FCLASS=<mode>
read
+FCLASS?
test
+FCLASS=?
This command selects a DCE mode – data or facsimile. Dummy command, included for
compatibility reasons.
13.1.2 +VTS DTMF generation
Command
execute
+VTS=<str>,<str>,...
test
+VTS=?
PN-3131 section 10.1.3. Also dialling command can be used to send DTMFs (see D).
Parameter <str> is <DTMF> or {<DTMF>,<duration>}, where <DTMF> is a single ASCII
character in the set 0-9,#,*,A-D. If no duration is given, the command uses 100 ms as a
"manufacturer-specific" value.
Response
<mode>
0,1,2,2.0
Response
+VTS: (),(),()
Default
0
95/113