After Sales
Technical Documentation
PDA Operation
When the cover is opened, the application which was active last, appears
in the same state. However, if you have made or answered a voice call in
the phone interface and switch to the communicator interface by opening
the device cover, the telephone application starts automatically.
To switch to another application, press the corresponding application
button; you can do this even during an active call.
You need not "exit" any application before starting another as all inactive
applications remain "frozen" until they are activated again. However, if the
battery is removed or completely discharged, all data is saved but
applications will return to their default states.
An auto save occurs every 5 minutes and when an application is changed,
all data is saved automatically. Data is also saved when pressing the
command button or closing the device cover.
Close
Every time the cover is opened a note is shown listing any unread faxes,
mail or short messages, unsent documents and missed calls.
Keys and Buttons
Original, 08/96
Figure 5. PDA Layout
RAE/RAK–1N
Quick Guide
Page 13