Vibration And Free Fall; Humidity And Water Resistance; Maximum Ratings; Operating Instructions - Nokia 9000i Service Manual

After Sales
Technical Documentation

Vibration and Free Fall

The transceiver meets the module phase error requirements which
equates to a total RMS vibration in the range 10 Hz to 150 Hz of 0.5 g.
The transceiver has been drop tested to withstand an 80cm drop onto a
solid floor.

Humidity and Water Resistance

Relative humidity range in normal operation conditions : 20 ... 75 %.
Relative humidity range allowed : 5 ... 95 %
The transceiver is not waterproof and care should be taken if used in
damp conditions.

Maximum Ratings

Pin / Conn
1 / Battery
1 / 3 / Char

Operating Instructions

Operating instructions are given in the QUICK GUIDE in the Appendix of
this manual and the USER'S GUIDE that comes with the product. The
transceiver is provided with a HELP system via both keypads (lid
open/closed). Also, 'on line' help will be available on the Internet via the
Nokia–club service.
Original, 08/96
Table 11. Maximum Ratings
Line Symbol Minimum
VBATT 5.0
VCHAR 10.0
RAE/RAK–1N
Typical / Maxi-
Nominal mum
7.2 9.0 V / Phone off in
min . extreme,
PDA on
12.0 13.0 V (unloaded)
Overview
Unit / Notes
Page 1– 19