Nokia 9000i Service Manual page 346

Content
The Swivel or the Flat Mounting Kit can be used to mount the Holder to
the vehicle. The Swivel is for adjustable mounting angles for each end of
the Holder and the Flat Mounting Kit is for mounting in a flat, fixed
position.
To install the Holder using the Flat Mounting Kit:
1) Attach the Snap Mounting Plate to convenient location using the four
black screws provided.
2) Attach the Fixed Mounting Plate to the Holder (at whichever end is
suitable) using the three silver screws provided.
3) Attach the Adapter Plate to the Fixed Mounting Plate using one of the
large mushroom–head screws.
4) Slide the Adapter Plate on to the Snap Mounting Plate.
To install the Holder using the Swivel:
1) Attach one of the Fixed Mounting Plates to a convenient location inside
the vehicle using the three black screws. Attach the other Fixed Mounting
Plate to the Holder (at whichever end is suitable) using the three silver
screws.
2) Fasten a Swivel Body to the Fixed Mounting Plate on the Holder using
one of the large mushroom–head screws. Before tightening the screw,
ensure that the Swivel Body is oriented to suit the mounting location.
Repeat this procedure for the Swivel Body which is to be attached to the
Fixed Mounting Plate on the vehicle.
3) Position the Holder in the desired orientation so that the teeth of the
Swivel bodies interlock. Fasten the bodies together using the silver bolt
and nut.
4
Original, 08/96
After Sales Technical Documentation
RAE / RAK–1N Series
Figure 2. Flat Mounted Fixing Kit
Fixed Mounting
Plate
Adapter Plate
Snap Mounting
Plate