Nokia 9000i Service Manual page 224

RAE/RAK–1N
Service Software
8 3.2 – Program Flash from File
This menu provides means to program the PDA Flash memory from a file
on the disk in the host.
Start Physical Address default: 3C00000h range: 3A00000h
Start Relative Address default: 000000h
If the Start Physical Address is set to 3E00000h the maximum Start
Relative Address may not be greater than 1FFBFFh.
The output from the target shows the following:
whether the buffer filling was successful
whether the Flash programming was successful
3.3 – Save Flash to File
This menu provides means to read contents of Flash memory and to save
it to a file in the host service software PC.
User options are:
Start Physical Address default: 3C00000h
Start Relative Address default: 000000h Range: 000000h – 1FFFFFh
End Physical Address default: 3E00000h
End Relative Address default: 1FFFFFh Range: 000000h – 1FFFFFh
The output from the target shows the following:
whether the command was parsed successfully
whether the Flash reading to buffer has been successful
whether the transferring of the buffer contents has been successful.
Page 7– 66
After Sales
Technical Documentation
3C00000h
3E00000h
range: 000000h –
1FFFFFh
Range: 3A00000h
3C00000h
3E00000h
Range: 3A00000h
3C00000h
3E00000h
Amendment 1 04/97