Using The Water Spring; Spillage Tray; Sliding Body Shelves - Blomberg KWD 9440 X A++ Instruction Manual

Using the water spring

Warnings
It is normal for the first few glasses of
water taken from the dispenser to be
warm.
In cases where the water dispenser
has not been used frequently, sufficient
amount of water must be drained from
the dispenser to get fresh water.

Spillage Tray

Water drops that drip during use,
accumulates in the spillage tray. You
can remove spillage tray by pulling it to
yourself. You can remove the water with
a sponge or a soft cloth.

Sliding Body Shelves

Sliding body shelves can be
pulled by slightly lifting up from
the front and moved back and
forth. They come to a stop
point when pulled towards front
to allow you reach the foods
placed at the back of the shelf;
when it is pulled after slightly
lifting upwards at the second
stop point, the body shelf will be
released.
The shelf should be held tightly
from the bottom as well in
order to prevent it from tipping
over. The body shelf is placed
on the rails at the sides of the
refrigerator body by bringing it
to one lower or one upper level.
The body shelf should be
pushed backwards to seat it
completely.
25
EN
1
2
3
4