Window Group Move - Sharp IV-S30J User Manual

[5] Window group move

All the window positions set in the measurement
programs for the same object type number can be
shifted horizontally by a specified amount as a group.
[Example of use] Shift the coordinate positions used
as data for another object type.
(After copying the data between object types, move
the windows as a group.)
To set the amount, use "
the" OBJECT TYPE SYS" menu.
1. While " SELECT CAMERA" is selected, press
the up and down arrow keys to select either
"CAM1" or "CAM2." Then press the SET key.
2. Select " STR COORD POSI" (store coordinate position) and press the SET key. Then select
"MOVE" by using the left and right arrow keys and finally, press the SET key.
3. Move the cursor (solid line) to the original coordinates before the move using the up, down, left, and
right keys, and press the SET key.
4. Select "COORDINATES STORED" using the left and right keys, and press the SET key. After that
press the ESC key.
The coordinates before the move are now registered.
5. Select " MOVE ALL WINDOW" using the up and down keys and press the SET key. Select
"MOVE" using the left and right keys and press the SET key.
6. Move the cursor (dotted line) to the new coordinates you are moving to use the up, down, left, and
right keys and press the SET key.
Coordinates of
the original
7. Select "EXEC" (execute) using the left and right keys and press the SET key.
All the windows registered to the same object type will be shifted horizontally at the same time by the
distance between the original coordinates to the new coordinates. After the move is complete, a
"Window group move is complete" message will be displayed.
Original window
- When some part of the window to be moved will move outside of the image display area, the "Out
of range" message will be displayed together with the measurement number and register number.
In this case, select "Continue" or "Halt."
If "Continue" is selected, the window will be shifted to the limit within the image display area.
MOVE ALL WINDOW" in
Distance to
move A
Coordinates
of the new
Distance to move A
New window
3-39
Setting the Conditions for Each Object Type
OBJ-TYPE SYS. SCREEN SAVE
1HALT ON NG MEAS
YES
2MNTR LIGHT LVL(CAM1) YES
3LIGHT LV COND
(TO NEXT SUB-BENU)
4MNTR LIGHT LVL(CAM2) YES
5LIGHT LV COND
(TO NEXT SUB-MENU)
6MOVE ALL WINDOW
(TO NEXT SUB-MENU)
MOVE ALL WIN SCREEN SAVE
1SELECT CAMERA
CAM1
2STR COORD POSI
MOVE(256,240) COORDINATES STORED
3MOVE ALL WINDOW MOVE(256,240) EXEC
F C1 BRT
3
F C1 BRT