Chapter 1: Setting And Operating Outline; Setting And Operating Procedures - Sharp IV-S30J User Manual

Chapter 1: Setting and Operating Outline

1-1 Setting and operating procedures

This paragraph describes the rough operation sequence of the IV-S30J.
1 System design
Plan your hardware environment to suit your use of the IV-S30J.
- Measurement program (positional deviation
measurement, degree of match inspection, etc.)
- Number of cameras, externally connected devices,
system components
- Input/output (start measurement input, result
output, object type change, etc.)
- Lighting equipment, illumination, shutter speed, lens, etc.
2 Installation/assembly
Install the hardware you will be using.
- Connection of cameras and monitor to the controller
- Installation of the controller and camera body
- Connection of a power supply, input/output terminals
and external devices
3 Turning ON the power supply (controller and monitor)
Supply power to each device.
4 Environment settings
Set IV-S30J parameters according to the actual hardware environment.
- Setting the Input/Output conditions
- Communication
- Computer link
- Gain/offset adjustment
5 Enter measuring programs
Entered using the
wizard
6 Editing Operation screen
7 Other settings
Initialization
8 Operation
9 Test/inspection
0 Maintenance
Entered using the
menu tree
Self Diagnosis
1-1
Setting and Operating Outline
(Ref. chapter)
User's manual
(Introduction and Hardware)
1-3 Measurement programs
3-1 Basic system configuration
3-2 System configuration examples
5-1 Installation conditions
User's manual
(Introduction and Hardware)
5-2 to 5-4 Installing, connecting,
and wiring methods
Chapter 16
Chapter 17
Chapter 18
Page 2-15
User's Manual
(Introduction and Hardware)
Chapter 7: Setting Examples
Using the Set Wizard
Chapter 8: Setting Examples
Using the Menu Tree
6-4 Operation chart
User's Manual
(Introduction and Hardware)
6-7 Editing operation screen
User's Manual
(Introduction and Hardware)
6-8 Option
Chapter 19: Troubleshooting
Chapter 19: Troubleshooting
1