Sharp IV-S30J User Manual page 175

COND. 1, COND. 2, (
Specify conditions for the auxiliary points that were selected in the "
How to enter COND.1 and COND.2.
4COND.1
REG NO MDL 0
5COND.2
REG NO MDL 0
A
A: Enter a register number from one of the measurement programs already registered.
B: Select a model: 0 or 1.
AUX JUDGEMENT1, AUX JUDGEMENT2
Specify judgment conditions for X and Y.
[TEST RESULT]: When executing a test from the "
displayed here.
[OUTPUT]: Specify a destination for the output of test results: "NO," "Y," or "C."
RUN A TEST
Press the SET key to execute a test.
COND.3)
B
13-5
Distance and Angle Measurement
AUXILIARY" item.
RUN A TEST" line the result will be
13