Sharp IV-S30J User Manual page 76

5. Select "0" using the up and down keys and
then select "MOVE" using the left and right
keys. Finally, press the SET key.
6. Move vertex 02 to 08 a little outside of the
first point on the star using the up, down,
left, and right keys, and then press the SET
key.
7. After creating a mask area, press the ESC
key to return to the "MASK BINARY IMG"
screen. Select " MASK REGIST" and
press the SET key. The cursor will move to
the "REG" position. Press the SET key to
register the mask.
- The area inside the mask will change to
white. To invert the inside and outside
shades (change white to black and black
to white), select "YES" on the "
INVERT B/W" line.
Setting the Conditions for Each Object Type
MASK BINARY IMGCREEN SAVE
1PO01T01
(255,255)
2PO02T01
(254,226)
3PO03T01
(221,226)
4PO04T01
(221,251)
5PO05T01
(274,276)
6PO06T01
(274,247)
7PO07T01
(257,247)
8PO08T01
()
MASK BINARY IMGCREEN SAVE
1PO01T01
2PO02T01
3PO03T01
4PO04T01
5PO05T01
6PO06T01
7PO07T01
8PO08T01
MASK BINARY IMG SCREEN SAVE
1MASK AREA
SET
2MASK IMVERT B/W NO
3MASK REGIST.
REG DISP
MASK
3-29
F C1 BRT
X:256 Y:240
F C1 BRT
(255,255)
(254,226)
(221,226)
(221,251)
(274,276)
(274,247)
(257,247)
()
X:124 Y:276
F C1 BRT
3