Sharp IV-S30J User Manual page 162

Display the measurement results
Return to the operation screen and press the TRG/BRT key. The measurement results will be dis-
played on the screen.
An example of the display when "gray search" is selected.
Final evaluation result
Measuring time
Measuring program number
Register number
Number of detected images
Numbered in the order detected (range)
*1
Degree of match
Detected point coordinates
- Move the cursor to "CHG-REG (change register)"
and press the up key. The measurement result
display will change in the following order: Register
No. 0 (detection No. 000 -> 001-> (ooo) -> (ooo) ->
Register No. 3 (ooo) -> Register No. 0 (ooo) ->
(ooo), and so will the measurement screen. Press
the down key to change the display, moving through
the items in reverse order.
* 1 The detection order can be set to either "SCAN-ORDER " or "MATCH LVL" on item "4DETECT
ORDER" on the "MEAS CND" screen. - See page 11-3.
* 2 The inspection number corresponds to the image of the solid line.
An example of the display when "gray search" is selected.
Register number
Number of points detected
Numbered in the order detected
*3
(range)
Detected point coordinate.
*3 Coordinates of the detected point.
(TYPE00)
OK
MEAS XXXXms
MEASUREMENT 1 MULTI-POSI
REGISTER NO.0(0~3)
K=004
DETECT NO.000(000 003)
M=+09870
X=236.0
Y=163.0
X0 6
MNU-CHG MAIN-COND CHG-MEA COND-CHG CHNG-REG SCREEN-CHG CHG-TYPE
DTECT NO.
11-11
Multiple Positional Measurement
F C1 BRT
OK
OK
*2
Y0 7 READY
V*.**