Table of Contents
Advertisement
READING SECTION
the actuator on the document edge sensor drops to end monitoring of the
document
The document is then output onto the document tray by the eject rollers.
Flat-bed types recently are designed to be equipped with a document stop-
per to reduce feed problems caused by over-insertion of the document or
insufficient insertion.
Some types are also designed with separation rollers provided above and
below in place of the separation guide and with an inversion roller to
improve separation performance.
3–8
length.
Document
Forwarding roller
Separation roller
Document stopper
Document edge
sensor actuator
Upper eject roller
Feed roller
Eject roller
Fig. 3-10 Document Output
Upper separation roller
Separation roller
Document
Fig. 3-11 Document Stopper
Document tray
Advertisement
Table of Contents
