Table of Contents
Advertisement
EOP
EOP is transmitted when a document was transmitted
continuously by EOM and MPS and there are no more
documents to send. EOP is also transmitted when
there is only one document sheet to transmit. When
MCF is received from the other party, DCN is trans-
mitted to disconnect the line.
MPS
MPS is transmitted when there is another document
and that document is to be transmitted without chang-
ing the communications mode. When the MCF arrives
from the receiver, the next page of the document is
transmitted.
EOM
EOM is used where there is another document and
that document is to be transmitted in a different com-
munications mode as the present page (for example,
when transmitting documents containing small-size
text in the fine mode). By EOM, DIS on the receiver is
verified again, and the communications mode is com-
municated by DCS to the receiving side after verifica-
tion that there is no contradiction with the functions of
the transmitter. When MCF is received from the other
party, arrival of DCS is waited for, and the mode-
changed DCS is transmitted after DIS is received to
communicate the mode to communicate by to the
receiving side.
G3 FACSIMILE COMMUNICATIONS
1
2
3
4
5
6
ït
çi
5–101
Advertisement
Table of Contents
