Table of Contents
Advertisement
G3 FACSIMILE COMMUNICATIONS
of 256 frames that are in an HDLC structure, and partitions image data
coded by the MH, MR, MMR or JBIG schemes into 256 bytes. Accord-
ingly, a single data block is 64 kbytes. The content of the coded image is
the same as in general G3 communications.
When the receiving side receives the image data of a single block, it checks
for errors by each individual frame. Error detection is performed by verify-
ing the continuity of the frame and the CRC check. The receiving side then
performs a re-transmit request for error frames by PPR. After the transmit-
ting side receives the re-transmit request, it transmits only the error frame
as the re-transmit block. When the receiving side receives the re-transmit
block, it checks for errors again by each individual frame, and returns the
result by PPR. When block has finished being transmitted normally by this
re-transmit processing, the receiving side returns the signal indicating that
the block was received normally. Fig. 5-85 shows an example of a commu-
nications procedure using ECM.
5–124
Advertisement
Table of Contents
