Event Notification Settings; Specifying An Output Port - JVC VR-N1600U - 16 Channel Network Video Recorder Instructions Manual

Applications
Camera Input/Output Port
and Events (continued)

Event Notification Settings

You can select events for triggering event notifications, and
display them in yellow, red or green on the [Live Viewing]
screen. The yellow indicator lights up when the specified
event has occurred, the red indicator lights up when motion
has been detected, and the green indicator lights up when
images are received from a camera.
1
Select the camera to configure from the [Camera
Recording Administator] screen, and select
[Settings...]
● A setting dialog box appears.
2
Click the [Event Notifications...] button
[Camera Settings]
2
Screen
3
Select the event to trigger notification from
[Available Events]
4
[Click the button
● The selected event is copied to [Active Events].
[Setup Notifications on Events] Screen
3
4
5
2 4
Repeat to for each event
● To delete an event for which notification has been
configured, select the event and click the [

Specifying an Output Port

A specific event or [Manual event name] button can be
associated with a particular output port.
To do this, specify the output port from which output is to be
triggered when a specific event or manual event occurs.
1
Select [I/O Control] from the [Camera Record
Setting] screen
● A setting dialog box appears.
[I/O Control] Screen
2
Select the event to specify from the list on the
left
3
Select the output to specify, and click the [
button located below [Selected Outputs]
● To delete an output from the [Selected Outputs] list,
select the output and click the [
] button.
]
] button.