Character Input And Mouse Pointer; Entering Characters Using A Mouse; Controlling The Mouse Pointer Using The Front Panel (When Mouse (Sold Separately) Is Not Connected) - JVC VR-N1600U - 16 Channel Network Video Recorder Instructions Manual

Preparation
Character Input and Mouse
Pointer
You can input characters and move the mouse pointers in
two different ways.
● Operate using the buttons on the front panel.
● Operate by connecting a mouse (sold separately).
Memo :
● Connecting a mouse eases the specification of complex
settings as well as input of characters.
● Connection to a keyboard is not recommended.
Keypad
WARNING
LIVE/BROWSE
OPERATE ALARM
SELECT HDD
LOCK
REC CONTROL
PTZ/PRESET
FUNCTION
SERIAL
CANCEL ZOOM OUT ZOOM IN ENTER
[16/ENTER] Button
[KEY] Button

Entering Characters Using a Mouse

You can use the software keyboard to input characters when
you are using mouse.
1
Press the [KEY] button on the front panel
● The software keyboard appears.
● Press the [KEY] button again to hide the software
keyboard.
Software Keyboard
2
Move the mouse pointer over the character on
the software keyboard that you want to enter
3
Click on the character
REV
SEARCH KEY ALARM CLEAR REC/STOP STOP(PB) PLAY
Memo :
● You can move the software keyboard by dragging any
portion of the keyboard other than the keys with the
mouse.
● To drag the software keyboard from the front panel, press
the arrow buttons on the keypad while holding down the
[16/ENTER] button.
● You can move the mouse pointer using the keypad when
the software keyboard is displayed.
Note :
● The [16/ENTER] button is enabled with a click of a mouse
when the software keyboard is displayed.
Controlling the Mouse Pointer Using the Front
Panel (When Mouse (Sold Separately) is not
Connected)
When a mouse is not connected, you can control the mouse
pointer using the front panel.
1
Press the [KEY] button
● The software keyboard appears.
FWD
● Press the [KEY] button again to close the software
keyboard.
2
SKIP
Move the mouse pointer with the keypad (arrow
key)
● Pressing the [16/ENTER] button has the same effect
as clicking at the position of the mouse pointer.