JVC VR-N1600U - 16 Channel Network Video Recorder Instructions Manual page 123

Pan/Tilt
: Tilts the camera upwards
: Tilts the camera downwards
: Pans the camera to the right
: Pans the camera to the left
Zoom
: Zooms out
: Zooms in
Iris
: Opens the iris
: Closes the iris
Focus
: Sets the focus to a distant position
: Focuses automatically
: Sets the focus to a closer position
Speed
For setting the movement speed of the PTZ action to eight
different levels. (1 represents the slowest speed)
Preset
Position For selecting HOME or any position
:
Selection between 1 to 50.
For moving to the position selected
:
using Position Selection
For registering a position selected
: using Position Selection as the current
position
Scene
Scene
: For selecting a scene between A to H.
Selection
For setting a scene selected using Scene
:
Selection
Night Mode
: Turns on the night mode
: Turns off the night mode
Menu
: Displays the PTZ camera menu
: Selects the PTZ camera menu
: PTZ camera's menu (Up cursor)
: PTZ camera's menu (Down cursor)
: PTZ camera's menu (Right cursor)
: PTZ camera's menu (Left cursor)
Exit
Exits PTZ camera control
Memo :
● You can use the [SKIP] buttons to change the item to
control.
● You can also use the cursor buttons on the keypad to
control movement in the direction indicated by the
respective buttons.
● You can use the [13/CANCEL] button to exit the PTZ
camera control mode.
Note :
● If you are unable to establish connection with the camera
by clicking the [Set ENTER)] button, try again after
stopping and rebooting the recording server. (APage 73
[Service Manager...])