Adjusting Camera Settings; Using Your Views On Different Computers - JVC VR-N1600U - 16 Channel Network Video Recorder Instructions Manual

Adjusting Camera Settings

1
Select the camera you want to adjust on the
[Screen Setup] screen
2
Select [Properties]
A
B
C
D
E
F
G
H
3
Adjust the following camera settings
accordingly
Item
A
Camera Displays the name of the selected
camera. (This is a read-only field.)
Name
B
mage Quality Enables you to adjust the image
resolution and picture quality during
viewing. Select [Full] at all times.
C
Frame Rate This is the viewing frame rate.
Select [Unlimited] (default value; same
as live settings), [Medium] (25 % of
the frame rate), or [Low] (5 % of the
frame rate), depending on the frame
rate specified in [Live Settings] (A
Page 50) on the [Camera Settings]
screen.
D
Maintain If this check box is selected, images
will not be stretched to fit the size of
Image
the display position. Images will be
Aspect
displayed in the aspect ratio that they
Ration
have been recorded.
E
Update on If this check box is selected, the
camera's images will only be updated
Motion
on the [Live] screen when motion is
detected.
F
Sound on Enables notification with a simple
sound when motion is detected while
Event
viewing images from the camera on
the [Live] screen.
Always off Does not produce sound notification
when motion is detected.
Always on Notifies with a sound each time motion
is detected.
[Screen Setup] Screen
Description
Item
G
Sound on Enables notification with a simple alert
sound when events related to the selected
Event
camera occur while viewing images from
the camera on the [Live] screen.
To use this feature, you need to configure
the event notification setting. (A Page 90)
Always off Does not output sound alert when an
event related to the camera occurs.
Always on Outputs a sound alert each time an event
related to the camera occurs.
H
Apply To Press this button to apply the new settings
to all cameras.
All
Note :
● Set VR-N1600U/E so that the total frame rate for viewing
on all surveillance computers is 80 ips or less.
● The recording frame rate may deteriorate if you change
the picture quality. The [mage Quality] settings may affect
the recording performance. As such, use this function with
the value fixed at Full .
● When you drag the timeline browser using the mouse
during playback, the frame rate setting is disabled.
[Searching Recorded Image Using the Timeline Browser]
(A Page 36)
● Notification sound is not output from VR-N1600U/E during
motion detection or occurrence of an event. This function
is for use by the NVR Viewer, which is downloaded onto
the surveillance computer.
4
To adjust the settings on other cameras, repeat
Steps 2 to 3
Memo :
● To adjust the settings of all cameras at once, click the
[Apply To All] button. The new camera settings will be
applied to all cameras in the view.

Using Your Views on Different Computers

User settings, including the [Private] view, are stored in VR-
N1600U/E. In other words, you can use your [Private] views
on any surveillance computer that has this unit and the NVR
Viewer installed (A Page 108) by logging in with your own
user name and password.
1
Double-click the [Setup] tab on the NVR Viewer.
Note :
● Particular user rights may be required in order to access
the [Setup] tab. In this case, consult your system
administrator.
2
Select the folder you want to use in the [Views]
section
● You can create or edit views.
● Folders that cannot be edited are indicated by the
[LOCK] icons.
Description