JVC VR-N1600U - 16 Channel Network Video Recorder Instructions Manual page 39

Memo :
● If you have selected a camera for which an audio source
has been set on the [Camera Settings] screen of [Camera
Record Setting], the preset audio sound is being output.
(A Page 49)
● If you have selected a camera for which an audio source
has not been specified, the most recently selected audio
source will be continuously output.
● When the recorded and live images are simultaneously
displayed, the displayed video image and audio sound
may not synchronize properly. (However, this has no
impact on recording to the system or additional hard disk.)
Manually Triggering an Event
To manually trigger an event, select the event in the [Event]
section, and click the [Activate] button.
Click
Memo :
● For details on events, refer to [Camera Input/Output Port
and Events] (A Page 83).
● Events must be defined in advance. (A Page 83)
Triggering Outputs
To trigger an output, select the output in the [Outputs...]
section, and click the [Activate] button.
Click
Memo :
● Outputs must be defined in advance. (APage 86
[Specifying an Output])
[Live] Screen
[Live] Screen
Camera Shortcut Menus
You can right-click on one of the images from the camera to
access the shortcut menu.
Items in the shortcut menu may vary according to the
configuration of the selected camera.
Item
A
Camera Displays the video image of another
camera in the selected position.
B
Sound Temporarily mutes warning sounds.
Notifications
C
PTZ Presets Moves the camera to the preset
position you have selected.
D
Matrix Select this option to use the Milestone
XProtect Matrix feature. For details,
refer to the Milestone XProtect Matrix
manual provided by Milestone
Systems.
E
Send Sends images from the selected
camera to another single-camera
Camera
position in an open view.
A
B
C
D
E
Description