Editing Device Settings - JVC VR-N1600U - 16 Channel Network Video Recorder Instructions Manual

Editing Device Settings

This section describe the procedures to edit the settings of
added devices.
1
Select [Camera Record Setting] from the main
menu
● The [Camera Recording Administator] screen appears.
[Camera Recording Administator] Screen
2
Select a device in the [Device Manager] section,
and click the [Edit Device...] button
● The [Device Setup Wizard] screen appears.
[Edit device settings] Screen
● The following items can be specified.
Item
A
Identify Video Device
Device Type
Detect
Device
Device Name Name used to identify the device. You
Camera
Settings...
Device Serial
Number
B
Network Settings for Video Device
IP address
Use DNS
host name
Default Http
Port
Default Ftp
Port
Root
Password
A
C
OK/Cancel
B
C
Description
For selecting the type of device from the
list.
Click this button to enable automatic
detection of the device type and serial
number.
cannot assign the same name to
multiple devices.
Displays the camera setting screen.
Serial number of the device. The 12-
character MAC address of the device is
normally used.
IP address or DNS host name of the
device.
Select this check box to identify the
device using the DNS host name
instead of its IP address.
Select this check box to allow HTTP
traffic to the device through the default
port (Port 80).
To use another port, deselect the check
box and specify the port number in the
field to the left of the check box.
Select this check box to allow FTP traffic
to the device through the default port
(Port 21).
To use another port, deselect the check
box and specify the port number in the
field to the left of the check box.
Enter the password for logging into the
device using the root account (also
known as Admin or Administrator
account).
Memo :
● If you are using VN-C625/VN-C655,
an error message does not appear if
you have entered a wrong password
and clicked OK, but access to the
camera may fail, such as not being
able to view the live images.
Confirms or cancels the settings.