Auto Detect Settings; Specifying Ip Lease - JVC VR-N1600U - 16 Channel Network Video Recorder Instructions Manual

Applications

Auto Detect Settings

This section enables you to assign an IP address to each
camera and configure various auto detect settings.

Specifying IP Lease

For configuring the function to assign IP addresses to each
network camera.
Note :
● In order to assign an IP address of the network camera
using the IP Lease feature, you need to enable the DHCP
of the network camera. For procedures to enable the
DHCP of the network camera, refer to the instruction
manual of the network camera.
1
Select [Auto Detect Setting] from [Main Menu]
● The [Auto Detect Settings] screen appears.
2
3
[Auto Detect Settings] Screen
2
Select [Enable] in [IP Lease]
Memo :
● If a network uses a multiple number of VR-N1600U/E
units, enable the [IP Lease] only for one unit. Select
[Disable] if a DHCP server is operating on the same
network.
● When the [IP Lease] is enabled for two or more devices at
the same time, the IP address may change to a static
address, and cause malfunction of the cameras.
3
Specify the following items under [IP Lease
Parameter]
Item
Start Address
Unit
Subnet Mask
Default Gateway
DNS Server
Domain Name
Lease Time Limit For specifying the valid period of the
Client
Reserve MAC
Address
4
4
Click [OK]
● Doing so closes the setting screen and starts the IP
Lease feature.
● Select Disable in Step
feature.
Description
For specifying the first IP address to
be assigned to the cameras.
For selecting the number of IP
addresses to be assigned to the
cameras. The selected number of IP
addresses will be assigned starting
from the first IP address.
For specifying the subnet mask for the
cameras.
For specifying the gateway for the
cameras.
For specifying the DNS server address
for the camera(s).
For specifying the domain name for
the cameras.
IP address assigned to the cameras. If
Yes is selected, you can set the
lease time in units of hours.
For selecting whether to apply
restrictions on the device when
assigning the IP address. If Only
Camera is selected, IP address will
only be assigned to the corresponding
camera. If Any Client is selected, IP
address will be assigned to all devices.
Configure the [Reserve MAC Address]
if you want to assign a specific IP
address to the cameras. A specific IP
address is always mapped to a MAC
address. Enter a value in the MAC and
IP fields, and click [Add] to set the
addresses. To cancel the setting,
select a displayed MAC and IP
address and click [Del].
2
to stop the IP Lease