General Settings - JVC VR-N1600U - 16 Channel Network Video Recorder Instructions Manual

[Adjust Motion Detection] Screen
Memo :
● The [Motion Sensitivity] slider is used to determine the
number of pixels for which a change is to be recognized
as motion. When the slider is moved from side to side, the
black vertical line at the bottom of the screen moves
together, and the boundary (Motion Sensitivity) is
adjusted. When detected motion is above the selected
sensitivity level, the bar changes color from green to red,
indicating a positive detection.

General Settings

Use [Camera Record Setting]^[General Settings] to specify
general settings related to the system, such as e-mails.
A
B
C
D
[General Settings] Screen
Item
A
Milestone Settings for using Milestone XProtect
Central by Milestone Systems.
XProtect
Central For details, refer to the XProtect Central
User's Manual provided by Milestone
Settings
Systems.
(http://www.milestonesys.com/
?cid=265)
B
Patrolling Specify the settings in this section when
you are using PTZ cameras for the
Settings
patrolling feature. (A Page 81)
C
Joystick For specifying settings related to the
joystick. (A Page 119)
D
E-Mail For specifying the e-mail settings.
(A Page 94)
settings
E
Advanced
Don't send Select this check box to stop sending e-
mail alerts if a camera is no longer in the
e-mail on
online mode.
camera
failures
Start You are able to view live images from
cameras on cameras even when they are in the
remote live offline mode.
requests
When the live image screen of the NVR
Viewer appears, the camera
automatically switches to the online
mode and records the image according
to the recording settings.
Note :
● :When Start cameras on remote live
requests is selected, the camera
switches to the online mode while
you are viewing live images.
Depending on the settings when in
the recording control mode, recording
may start when you start viewing live
images. This also applies to viewing
live images on a surveillance
computer.
G
F
E
Description