JVC VR-N1600U - 16 Channel Network Video Recorder Instructions Manual page 73

When specifying LAN2 (Intranet) settings
Item
ANetwork adapter
interface name
(continued)
Obtain an IP
address
automatically
IP address
Subnet Mask
Default Gateway
Perferred DNS
Server
Alternate DNS
Server
Host Name
DNS Domain Name
Other Settings
Item
B
Day and Time Properties
Automatically
synchronize with an
Internet server
Server
NTP Polling Interval
Date
Time
Time Zone
C
Volume Properties
Device Volume
D
LOAD configuration
E
SAVE changes
F
CANCEL changes
Preset Values
Intel 8225xER PCI
Adapter
Select check box
Do not select
check box
192.168.1.253
255.255.255.0
192.168.1.254
0.0.0.0
0.0.0.0
vr-n1600
^
Preset Values
Select check box
Do not select
check box
^
^
^
VR-N1600U :
(GMT-05:00)
Eastern Time
VR-N1600E :
(GMT) Greenwich
Mean Time
Center position
^
^
^
Settings when you are using LAN2 (Intranet).
Memo :
● To specify an IP address other than the default value, consult your
system administrator.
● If the host name is changed, you need to specify Windows user in
[User Administration] under [Image Server Setting]. (A Page 104)
● Do not set the default gateway for both the camera network and
Intranet on the [OS Setting] screen. Doing so may cause the system to
malfunction.
To synchronize the time with the Internet time server or to specify the
date and time manually, click [Update Now].
Select this check box to synchronize the time with the Internet time
server.
Note :
● You cannot specify the date and time manually when this box is
selected. The settings in the boxes cannot be changed.
● The date and time properties are not enabled until you have clicked
the [Update Now] button.
● Changing the time setting may prevent normal playback of recordings
made at the same time as a result.
● Changing the Time field of the time setting when operations are in
progress may prevent normal display of live images. In this case,
reboot VR-N1600U/E.
Enter the address of the Internet time server.
For specifying the time interval (in minutes) for synchronizing with the
Internet time server.
Enter this field when you are specifying the date manually.
For specifying the time zone.[Auto Summertime Adjustment] is checked.
Note :
● Make sure that the date and time that you specify does not overlap
with any previous recorded data.
● If the specified time zone is incorrect, the system may not run at the
correct time after synchronizing with the Internet time server.
● When changes are made to the time zone, press and hold the
[FUNCTION] button, and press the [LIVE/BROWSE] button at the
same time to reboot the NVR Viewer.
Adjust the volume using the slider bar.
Reads the preset configuration files and displays them on the screen.
Exits after entries and the selected content are configured to the system.
Manual update of time is disabled. To update the time manually, go to the
[Day and Time Properties] item C.
Exits without saving all entries and selected settings.
Description
Description