Show Sntp Server - Dell PowerEdge M420 Reference Manual

Example
The following example displays the current SNTP configuration of the
device.
console#show sntp configuration
Polling interval: 64 seconds
MD5 Authentication keys:
Authentication is not required for synchronization.
Trusted keys:
No trusted keys.
Unicast clients: Disable
Unicast servers:
Server
---------
10.27.128.21

show sntp server

Use the show sntp server command in Privileged EXEC mode to display the
pre-configured SNTP servers. The configured servers can be either IPv4 or
IPv6 format.
Syntax
show sntp server
Parameter Description
This command does not require a parameter description.
Default Configuration
This command has no default configuration.
Key
-----------
Disabled
Polling
-----------
Enabled
Clock Commands
Priority
----------
1
1317