Vrrp Timers Advertise - Dell PowerEdge M420 Reference Manual

level — Priority value for the interface. (Range: 1-254)
•
Default Configuration
Priority has a default value of 100.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
This command has no user guidelines.
Example
The following example sets the priority value for the virtual router 5 on VLAN
15.
console(config-if-vlan15)#vrrp 5 priority 20

vrrp timers advertise

Use the vrrp timers advertise command in Interface Configuration mode to
set the frequency, in seconds, that an interface on the specified virtual router
sends a virtual router advertisement. Use the no form of the command to
return the advertisement frequency to the default value.
Syntax
group
vrrp timers advertise
group
no vrrp timers advertise
group — The virtual router identifier. (Range: 1-255)
•
interval — The frequency at which an interface on the specified virtual
•
router sends a virtual router advertisement. (Range: 1-255 seconds)
Default Configuration
Interval
has a default value of 1.
interval
interval
Virtual Router Redundancy Protocol Commands
1245