Sharp Actius PC-MP30 Operation Manual page 95

DirectHD Precautions
• When the host computer is in the standby or hibernation mode, do not
turn on the MP series or connect/disconnect the DirectHD cable. It
may damage the file or cause malfunction of the host computer when
the host computer resumes.
• If you delete some files of the MP series on the host computer, you
may not be able to restore them.
• To use the DirectHD function, exit Windows and turn off the computer
before connecting it to the host computer with the DirectHD cable.
• If you remove both of the AC adapter and battery pack after exiting
Windows, the DirectHD will fail to function. Before connecting to the
host computer, start Windows on the MP series and then, exit it to turn
off the MP series.
Time Synchronization
During data communication with the host computer, set the time of the MP series and
the host computer to be synchronized. When you modify the file, the modification
time will be recorded in the Properties of the file. If the time on the host computer and
the MP series is different each other, you may not be able to properly manage the files
by the modification time or accidentally overwrite the latest file with the previous
version.
6
Application Program Installation
When installing an application program, turn on the MP series and install it directly on
the hard drive of the MP series. You cannot install any application to the MP series
through the host computer.
Before installing an application program, carefully read its license
agreement.
Installing DirectHD Utility
The following shows how to install the DirectHD utility to your host computer.
1. Turn off your MP series.
• Be sure to turn off your MP series computer. You cannot access to the
6-2
MP series from the host computer when the MP series is powered on
or in the standby/hibernate mode.